Oil pan, removing and installing: Removing

Fig 1: Removing Noise Insulation

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Removing Oil Return Line From Oil Pan

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE: Loosen and tighten oil pan bolts with jointed wrench 3185. Remove bolts with socket attachment 3249.

Take off oil pan: if necessary loosen it by striking lightly with a rubber hammer.
Remove sealant remaining on cylinder block with flat scraper.

Fig 3: Removing Remaining Sealant From Oil Pan

Courtesy of VOLKSWAGEN UNITED STATES, INC.

WARNING:

Wear eye protection