LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2000 >> TT Base, 1.8 S >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panels >> Self-Diagnostic System >> Function Mode 10: Adaptation >> Channel 30

Channel 30

NOTE: This function is used to adjust fuel gauge sender resistance if fuel gauge does not match actual amount of fuel in tank.
  1. When ADAPTATION FEED IN CHANNEL NUMBER XX is displayed, press 3 and 0 keys (30), then press "Q" to confirm input. CHANNEL 30 ADAPTATION 128 <-1 3-> will be displayed (128 is factory setting). If gauge reading is incorrect, adaptation value can be decreased to a minimum of 120 (-8 ohms) or increased to a maximum of 136 (+8 ohms).
  2. Press right arrow key. CHANNEL 30 ADAPTATION 128 ENTER ADAPTATION VALUE XXXXX will be displayed. Enter required adaptation value on scan tool using zero for first 2 numbers (example: 132 = 00132). Press "Q" key to confirm input. CHANNEL 30 ADAPTATION 132 <-1 3-> will be displayed. Press "Q" to confirm input.
  3. CHANNEL 30 ADAPTATION 132 STORE CHANGED VALUE? will be displayed. Press "Q" to confirm input. CHANNEL 30 ADAPTATION 132 CHANGED VALUE IS STORED will be displayed. Press right arrow key to complete adaptation of fuel gauge sender resistance.
scientia non olet · About LEMON Manuals