Ribbed belt pulley, removing and installing

Special tools, testers and auxiliary items needed 

Fig 1: 3310 Socket

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Socket 3310

Fig 2: Torque Wrench V.A.G. 1332

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• VAG 1332 Torque wrench (or equivalent 40 - 200 Nm )

Fig 3: Locating Nut At Pulley

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Counter-hold securing nut using 3310.

• To remove, turn generator shaft clockwise
• To install, turn generator shaft counter-clockwise

Tightening torques