SID: time remaining until next Inspection Service (adaptation after replacing instrument cluster)

This function is used after replacing the instrument cluster to enter the time remaining (in days) before the next Inspection Service is due.

Rapid data transfer HELP
Select function XX

Indicated on display:

Press buttons -1- and -0- and confirm input with Q button.

Adaptation
Enter channel number XX

Indicated on display:

Press buttons -4- and -1- to access "channel 41".
Press -Q- button to confirm input
Indicated on display: for new instrument cluster:

The time (in days) remaining before the next Inspection Service is due must be transferred from the old instrument cluster (e.g. 110 days = adaptation value 110).

NOTE:

The number can be entered in steps of 1 day; the readout on the display will also be in steps of 1 day.
The entered value is counted upward from 0 to 365 days.
Input values when replacing instrument cluster. Refer to Replacement instrument cluster input values, adapting .
When using the button pad on the scan tool, the number must be entered directly.
If an incorrect value is entered the adaptation function will be terminated and must be re-started.

Press " button.

Channel 41 Adaptation 0
Enter adaptation value XXXXX

Indicated on display:

Enter required value (noted from old unit) via button pad on scan tool, filling in the initial spaces with "0."

Example:

Remaining time: 110 days
Input value: 00110

Channel 41 Adaptation 0 Q
Enter adaptation value 00110

Indicated on display (example only):

Press -Q- button to confirm input

Channel 41 Adaptation 110 Q
< - 1 3- >

Indicated on display:

Press -Q- button to confirm input

Channel 41 Adaptation 110 Q
Store changed value?

Indicated on display:

Press -Q- button to confirm input

Channel 41 Adaptation 110 →
Changed value is stored

Indicated on display:

Press → button to terminate adaptation of service interval display.