LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2000 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (On Board Diagnostic (OBD) - 4.2L V8 5V - Art, Awn) >> On Board Diagnostic (OBD) >> Output Diagnostic Test Mode (DTM) >> Output DTM for engine code: ART >> The DTM activates the following components in the stated sequence:

The DTM activates the following components in the stated sequence:

WARNING: This page is about a different car, the 2004 Audi A6, 2003 Audi A6, 2002 Audi A6, 2001 Audi A6, and 2000 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
  1. EVAP canister purge regulator valve -N80-
  2. Secondary Air Injection (AIR) Solenoid Valve -N112-
  3. Secondary Air Injection (AIR) Pump Relay -J299-
  4. Intake Manifold Change-Over Valve -N156-
  5. Valve -1- for camshaft adjustment -N205- and Valve -2- for camshaft adjustment -N208-
  6. Leak Detection Pump for EVAP system
  7. Intake Manifold Tuning (IMT) Valve -N261-
  8. Left engine mount 1 (driving direction)
  9. Right engine mount 2 (driving direction)
  10. Cylinder 1 Fuel Injector -N30-
  11. Cylinder 5 Fuel Injector -N83-
  12. Cylinder 4 Fuel Injector -N33-
  13. Cylinder 8 Fuel Injector -N86-
  14. Cylinder 6 Fuel Injector -N84-
  15. Cylinder 3 Fuel Injector -N32-
  16. Cylinder 7 Fuel Injector -N85-
  17. Cylinder 2 Fuel Injector -N31-

Component location of actuators. See COMPONENT LOCATIONS, OVERVIEW .

scientia non olet · About LEMON Manuals