On Board Diagnostic (OBD) functions

The following functions are possible:

1. 02 - Check DTC Memory. See CHECK DTC MEMORY (SCAN TOOL FUNCTION 02)  .
2. 03 - Output Diagnostic Test Mode. See OUTPUT DIAGNOSTIC TEST MODE (SCAN TOOL FUNCTION 03)  .
3. 05 - Erase DTC Memory. See ERASE DTC MEMORY (SCAN TOOL FUNCTION 05)  .
4. 06 - End Output. See END OUTPUT (SCAN TOOL FUNCTION 06)  .
5. 07 - Code Control Module. See CODE CONTROL MODULE (SCAN TOOL FUNCTION 07)  .
6. 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (SCAN TOOL FUNCTION 08)  .
7. 10 - Adaptation. See ADAPTATION (SCAN TOOL FUNCTION 10)  .