Adapting fuel consumption indicator
Indicated on display
- Press buttons -1- and -0- to select "Adaptation" function 10.
- Press -Q- button to confirm input.
Indicated on display
- Press buttons -0- and -3- to insert channel number 03.
- Press -Q- button to confirm input.
NOTE:
- Adaptation is only possible on vehicles with the driver information display.
- The value entered must be between 85% and 115%.
- The value must be entered in steps of 5%.
Indicated on display
- Press --> button.
NOTE:
The fuel consumption indicator can only be adapted using direct input.
Indicated on display
- Input required adaptation value using keypad on VAG1551 scan tool, filling in initial spaces with "0."
Example:
Required value: 90%
- Input "00090" using keypad.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press --> button to complete fuel consumption indicator adaptation.
Indicated on display
If an incorrect entry is made the VAG1551 or VAG1552 Scan Tool (ST) will switch to the following display.
- Press --> button.
- Select "Adaptation" function 10 and adaptation channel number 03 again.
- Repeat adaptation of fuel consumption indicator.
- Confirm entry with -Q- button.