Maximum time interval
This function is used to set a fixed maximum time in days in the instrument cluster for the SRI.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Maximum Time Interval, Instrument Cluster With Maintenance Interval Extension (1 Of 9)
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Maximum Time Interval, Instrument Cluster With Maintenance Interval Extension (2 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Maximum Time Interval, Instrument Cluster With Maintenance Interval Extension (3 Of 9)
- Press buttons -4- and 4-.
- Press -Q- button to confirm input.
- Indicated on display. The display indicates the maximum time interval in days to the next service (for example, 365 represents 365 days).
NOTE:
- The adaptation value input must match the value in the table under MALFUNCTION MESSAGE "DEF" ON TRIP ODOMETER DISPLAY .
- The currently valid specifications can be found in the "Maintenance" book.
- Input of the current specified value is only possible in units of one day, indication in display also changes by units of one day.
- When replacing instrument cluster, this value is already set.
- Values can only be input directly using the scan tool keypad.
- If an incorrect value is input, the "Adaptation" function is terminated and must be re-initiated.
- Press --> button.
- Indicated on display
- Input specified value using keypad, filling initial positions with "0".
Input value: for example 365 days
Keypad input: 00365
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- Press -Q- button to confirm input.
- Indicated on display
- End adaptation of maximum time interval by pressing the --> button.