Maximum mileage
This function is used to set a fixed maximum mileage in the instrument cluster for the SRI.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (1 Of 9)
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (2 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (3 Of 9)
- Press buttons 4- and 3-.
- Press -Q- button to confirm input.
Fig 4: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (4 Of 9)
Indicated on display: Factory adjusted value for the maximum mileage (in miles) until next service is indicated (here for example 8 represents 8000 miles)
NOTE:
- The adaptation value entered for the relevant engine variant must match the value in the table under MALFUNCTION MESSAGE "DEF" ON TRIP ODOMETER DISPLAY .
- The currently valid specifications can be found in the "Maintenance" book.
- Input of current specified value is only possible in units of 1000, indication in display also changes by units of 1000.
- In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
- When replacing instrument cluster, this value is already set.
- Values can only be input directly using the scan tool keypad.
- If an incorrect value is input, the "Adaptation" function is terminated and must be re-initiated.
- Press --> button.
Indicated on display
Fig 5: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (5 Of 9)
- Input specified value using keypad, filling initial positions with "0".
Input value: for example 8000 miles
Keypad input: 00008
Indicated on display
Fig 6: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (6 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 7: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (7 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 8: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (8 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 9: VAG 1551 Scan Tool Display - Maximum Mileage, Instrument Cluster With Maintenance Interval Extension (9 Of 9)
- Conclude adaptation of maximum mileage by pressing the --> button.