Initiating "Adaptation" function 10

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Adaptation, Instrument Cluster With Maintenance Interval Extension (1 Of 3)

Press buttons -1- and -0-. This selects "Adaptation," function 10.
Press -Q- button to confirm input.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Adaptation, Instrument Cluster With Maintenance Interval Extension (2 Of 3)

Press -Q- button to confirm input.

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Adaptation, Instrument Cluster With Maintenance Interval Extension (3 Of 3)

Enter desired adaptation channel (adaptation table under INITIATING "ADAPTATION" FUNCTION 10 ).
Press -Q- button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.