Initiating "Adaptation" function 10

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Adaptation, Instrument Cluster (1 Of 2)

Press buttons -1- and -0- to select "Adaptation" function 10.
Press -Q- button to confirm input.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Adaptation, Instrument Cluster (2 Of 2)

Insert required adaptation channel number. See ADAPTION FUNCTIONS - INSTRUMENT CLUSTER table.
Press -Q- button to confirm input.

NOTE: After an adaptation value has been changed, or adaptation in a specific channel has been completed, "Adaptation" function 10 must be selected again in order to select another adaptation channel.