End Output
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - End Output, Instrument Cluster With Maintenance Interval Extension (1 Of 3)
- Press buttons -0- and -6-. This selects "End Output," function 06.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - End Output, Instrument Cluster With Maintenance Interval Extension (2 Of 3)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - End Output, Instrument Cluster With Maintenance Interval Extension (3 Of 3)
- Switch off ignition.
- Disconnect harness connectors for the VAG1551 scan tool