Initiating coding
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Code Control Module, Instrument Cluster With Maintenance Interval Extension (1 Of 5)
- Press buttons -0- and -7-. This selects "Coding Control Module," function 07.
- Press -Q- button to confirm input.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Code Control Module, Instrument Cluster With Maintenance Interval Extension (2 Of 5)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Code Control Module, Instrument Cluster With Maintenance Interval Extension (3 Of 5)
- Input code number using coding table. See READ MEASURING VALUE BLOCK (SCAN TOOL FUNCTION 08) .
Example: 02283
02 Optional equipment
2 USA
8 8-cylinder
3 8-cylinder gasoline engine
- Indicated on display
- Press -Q- button to confirm input.
Indicated on display after approx. 5 seconds:
Fig 5: VAG 1551 Scan Tool Display - Code Control Module, Instrument Cluster With Maintenance Interval Extension (5 Of 5)
- Press --> button.