Initiating output DTM
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode" function 03.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Output Diagnostic Test Mode, Automatic Headlight Aim Control (1998-99) (1 Of 5)
- Press -Q- button to confirm input (output DTM for headlight vertical headlight aim control system is started).
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Output Diagnostic Test Mode, Automatic Headlight Aim Control (1998-99) (2 Of 5)
Headlights will be lowered until sequence is switched ahead or the lowest position is reached.
- Press --> button.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Output Diagnostic Test Mode, Automatic Headlight Aim Control (1998-99) (3 Of 5)
Headlights will be raised until sequence is switched ahead or the highest position is reached.
- Press --> button.
Indicated on display
Fig 4: VAG 1551 Scan Tool Display - Output Diagnostic Test Mode, Automatic Headlight Aim Control (1998-99) (4 Of 5)
- Press --> button.
The scan tool returns to the "Select function XX" mode.
Indicated on display