Initiating Basic Setting
- Press buttons -0- and -4- to select "Basic Setting" function 04.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (1 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (2 Of 9)
- Press buttons -0-, -0-, and -1- to input Display group number 001.
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (3 Of 9)
Headlights are moved into adjustment position.
Indicated on display
Fig 4: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (4 Of 9)
Headlights are now in adjustment position.
- Adjust headlights.
Basic setting 1 turns regulation off and "Headlights not adjusted" will be stored in DTC memory.
- Press --> button.
Indicated on display
Fig 5: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (5 Of 9)
- Press buttons -0- and -4- to select "Basic Setting" function 04.
Indicated on display
Fig 6: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (6 Of 9)
- Press -Q- button to confirm input.
Indicated on display
Fig 7: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (7 Of 9)
- Press buttons -0-, -0-, and -2- to input Display group number 002.
- Press -Q- button to confirm input.
Indicated on display
Fig 8: VAG 1551 Scan Tool Display - Basic Setting, Automatic Headlight Aim Control (1998-99) (8 Of 9)
The control module has stored this position as the normal position. "Headlights not adjusted" is erased from DTC memory and regulation is switched back on.
- Press --> button.
Indicated on display