Test requirements:
- Check fuse for function according to wiring diagram.
- Connect VAS5051 tester or VAG1551 scan tool. See VAS 5051 VEHICLE DIAGNOSTIC, MEASURING AND INFORMATION SYSTEM OR VAG1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS .
NOTE:
- If nothing is indicated on display, check voltage supply for VAG 1551 scan tool according to wiring diagram.
- Additional instructions can be called up via the -HELP-button on the scan tool.
- The --> -button is used for advancing through the program sequence.
- An incorrect entry can be canceled using the C- button.
- Function 00 "Automatic test sequence" can be performed in operating mode 1 "Rapid data transfer". This automatically checks all control modules installed in the vehicle.
- Switch on ignition.
- Switch printer on via the print-button (indicator lamp in button lights up).
- Press button -1 - to select "Rapid data transfer" operating mode 1.
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (1 Of 8)
Address word for automatic vertical headlight aim control: 55
- Press buttons -5- and -5-.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (2 Of 8)
- Press -Q- button to confirm input.
Fig 3: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (3 Of 8)
Indicated on display after approx. 5 seconds:
- 4B0907357B: Part number of control module for automatic vertical headlight aim control (see also parts catalog)
- D02: Software version of control module for automatic vertical headlight aim control
- Coding 00020: Coding of control module for automatic vertical headlight aim control
- WSC 06812: dealership number
- Press --> button.
If one of these messages is indicated on the display:
Indicated on display
Fig 4: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (4 Of 8)
or
Indicated on display
Fig 5: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (5 Of 8)
or
Indicated on display
Fig 6: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (6 Of 8)
or
Indicated on display
Fig 7: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (7 Of 8)
- Check wiring connections for Data Link Connector (DLC).
Indicated on display
Fig 8: VAG 1551 Scan Tool Display - On Board Diagnostic, Automatic Headlight Aim Control (2000-04) (8 Of 8)
- Pressing the -HELP- button will print out an overview of all of the possible functions.
- Press the --> button to continue program sequence.