General information: Function:

Automatic vertical headlight aim control consists of:

• Automatic vertical aim control system control module J431-
• Left rear level control system sensor -G76-
• Left front level control system sensor -G78-
• Left headlight beam adjusting motor -V48-
• Right headlight beam adjusting motor -V49-

When the vehicle is started, it's current tilt is determined according to a specified value and is sent to the automatic vertical headlight aim control actuator, which leads to a one time correction of the headlight tilt, regardless of whether or not low beams are switched on.

Thereafter, changes relative to the specified value are only sent to the automatic vertical headlight aim control actuator when low beams are switched on.

If malfunctions occur in the system, the driver is notified via a warning symbol in the instrument cluster's center display.