Erase DTC Memory: Requirements
- DTC memory checked. See CHECK DTC MEMORY .
- All malfunctions repaired.
After successful DTC memory check:
Indicated on display
Fig 1: VAG 1551 Scan Tool Display - Erase DTC Memory, Automatic Headlight Aim Control (2000-04) (1 Of 6)
- Press buttons -0- and -5-. This selects "Erase DTC memory," function 05.
Indicated on display
Fig 2: VAG 1551 Scan Tool Display - Erase DTC Memory, Automatic Headlight Aim Control (2000-04) (2 Of 6)
- Press -Q- button to confirm input.
Fig 3: VAG 1551 Scan Tool Display - Erase DTC Memory, Automatic Headlight Aim Control (2000-04) (3 Of 6)
Indicated on display DTC memory is erased.
- Press --> -button.
Indicated on display
Fig 4: VAG 1551 Scan Tool Display - Erase DTC Memory, Automatic Headlight Aim Control (2000-04) (4 Of 6)
NOTE:
- Test sequence is faulty if this message is displayed.
- Test sequence is faulty if this message is displayed.
Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.