Initiating "Adaptation" function 10
Indicated on display
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press buttons -0- and -1-.
- Press -Q- button to confirm input.
Indicated on display
- Either adjust adaptation value downward using button -1-, upward using button -3- or press --> button.
- Press --> button.
Indicated on display
- Now enter the adaptation value by hand (e.g. 00005).
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Conclude adaptation of sensitivity by pressing the --> button.
Indicated on display