On Board Diagnostic (OBD) functions

The following functions are possible:

1. 01 - Check control module version. See CHECK CONTROL MODULE VERSIONS  .
2. 02 - Check DTC Memory. See CHECK DTC MEMORY  .
3. 05 - Erase DTC Memory. See ERASE DTC MEMORY  .
4. 06 - End Output. See END OUTPUT  .
5. 07 - Code Control Module. See CODE CONTROL MODULE  .
6. 08 - Read Measuring Value Block. See MEASURING VALUE BLOCK, READING  .
7. 10 - Adaptation. See ADAPTATION  .