Diagnostic Trouble Code (DTC) memory, checking (scan tool function 02)

Switch on printer with the PRINT button (indicator lamp in button lights up).
Indicated on display:

Fig 1: VAG 1551 Scan Tool Display - DTC Memory Checking (1 Of 5)
Courtesy of AUDI OF AMERICA, INC.
Press buttons 0 and 2 to select function "Check DTC memory."
Indicated on display:

Fig 2: VAG 1551 Scan Tool Display - DTC Memory Checking (2 Of 5)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
The number of stored malfunctions appears on display.

Fig 3: VAG 1551 Scan Tool Display - DTC Memory Checking (3 Of 5)
Courtesy of AUDI OF AMERICA, INC.
The number of stored DTCs or "No DTCs recognized" appears in the display and they are printed one after the other.
With printed list of malfunctions go to diagnostic trouble code table for instructions on how to correct malfunctions. See DIAGNOSTIC TROUBLE CODE (DTC) TABLE .
If "No DTC recognized is displayed, the program will return to the initial position after pressing the -->button.

Fig 4: VAG 1551 Scan Tool Display - DTC Memory Checking (4 Of 5)
Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 5: VAG 1551 Scan Tool Display - DTC Memory Checking (5 Of 5)
Courtesy of AUDI OF AMERICA, INC.

If display is different:

See Scan tool operating instructions.
End output (function 06). See END OUTPUT (SCAN TOOL FUNCTION 06) .
Switch off ignition and disconnect Data Link Connector (DLC).