Adaptation (function 10)

Indicated on display.

Fig 1: Scan Tool Display - Adaptation, Instrument Cluster (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons 1 and 0. With function 10 "Adaptation" is selected.
Press Q button to confirm input.
Indicated on display.

Fig 2: Scan Tool Display - Adaptation, Instrument Cluster (2 Of 3)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 3: Scan Tool Display - Adaptation, Instrument Cluster (3 Of 3)
Courtesy of AUDI OF AMERICA, INC.
Enter adaptation channel (adaptation table), see ADAPTATION TABLE: .
Press Q button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, the function "10 Adaptation" must be performed to select another adaptation channel.