Disassembly & Reassembly

WARNING: This page is about a different variant/trim than selected.

Remove shock absorber nut. See Fig 2 . Remove components from shock absorber. To assemble, reverse disassembly procedure. Ensure coil spring is positioned properly. Lower end of coil spring must be aligned within 30 degrees of right side of vehicle. Use NEW shock absorber nut.

Fig 1: Exploded View Of Shock Absorber

Courtesy of AUDI OF AMERICA, INC.

Fig 2: Removing Shock Absorber Nut

Courtesy of AUDI OF AMERICA, INC.