Wheel Hub (Light Construction): Notes
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Light construction wheel hub can be differentiated from traditional wheel hubs by spinning washer (1) and sleeve (2). See Fig 1 . Light construction wheel hub must only be used in connection with respective wheel bearing . It must only be used on vehicles with light construction wheel hub, on which they are already factory installed. Spinning washer is deformed when removing wheel bearing and must be replaced!