Wheel Bearing: Notes

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Before performing repair work on rear axle on Audi Allroad, level control system must be deactivated in normal level setting. See ON-VEHICLE SERVICE .

NOTE: Wheel bearing MUST be replaced if removed, as removal will damage it. During any removal and installation procedure, if axle nut/bolt is removed or installed, do so with vehicle resting on floor at full curb weight. Always replace axle shaft self-locking nut/bolt with NEW parts when removed.