LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A6 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Suspension - Rear, AWD) >> Removal & Installation >> Upper Control Arm >> Removal

Upper Control Arm: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove wheel. Remove upper control arm-to-subframe bolts. See Figure .
  2. Remove upper control arm-to-wheel bearing housing bolt. Remove upper control arm.