Strut Assembly: Reassembly

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

To assemble, reverse disassembly procedure. Ensure spring ends are against rubber stops. See Fig 1 .

Fig 1: Positioning Spring In Strut Assembly (Lower Spring End Shown)
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Ensure that upper strut mount is aligned as specified. See Fig 2 . Using NEW piston rod nut. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .

Fig 2: Checking Alignment Of Upper Strut Mount

Courtesy of AUDI OF AMERICA, INC.