LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1999 >> A6 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lights, Switches-Exterior - 2001 And Up) >> Lock cylinder and Ignition/starter switch >> Ignition/starter switch, removing and installing >> Installing

Ignition/starter switch, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Installation is reverse of removal, noting the following:

NOTE: Make sure ignition/starter switch and lock cylinder are both in the same position, for example "ignition on" when installing.
scientia non olet · About LEMON Manuals