High-mount brake light (sedan), removing installing: Removing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Pull down spacer grid between rear window and brake light at holding strap.
Loosen high-mount brake light from tabs in luggage compartment and pull out from metal cut-out toward bottom.

Fig 1: Removing High-Mount Brake Light From Tabs In Luggage Compartment (Sedan)

Courtesy of AUDI OF AMERICA, INC.

Disconnect electrical connection.
Lever off headlight lens from bulb carrier to removing bulb.

Fig 2: Removing High-Mount Brake Light (Sedan)

Courtesy of AUDI OF AMERICA, INC.

The bulbs (10 x 12 V, 2.3 W) are inserted into the bulb carrier.