High-mount brake light -M25-, removing and installing (Sedan): Removing

Release retainers from high-mount brake light in luggage compartment.
Pull brake light down and out of opening in metal panel.

Fig 1: Pulling High-Mount Brake Light Down & Out Of Opening In Metal Panel (Sedan)

G02719696

Disconnect electrical connector.
To change bulb, carefully pry lens from bulb carrier.
Install bulbs (10 x 12 V, 2.3 W) into bulb holder.

Fig 2: Replacing High-Mount Brake Light Bulbs (10 X 12 V, 2.3 W) Into Bulb Holder (Sedan)

G02719697