Window regulator switches, driver side, removing and installing: Removing

Insert screwdriver -1- in hole -2- in door pull.

Fig 1: Inserting Screwdriver In Hole In Door Pull

G02719736

Using screwdriver -3-, push retaining tab -2- in direction of arrow -A-.
Remove window regulator switches -1- in direction of arrow -B-.

Fig 2: Removing Window Regulator Switches - Driver Side

G02719737

Push in retainer tabs -2- and disconnect electrical connector -1-.

Fig 3: Disconnecting Window Regulator Switche Electrical Connector - Driver Side

G02719738