LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> Cabriolet >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (On Board Diagnostic (OBD) - 2.7L V6 BITURBO - APB, Bel) >> 01 On Board Diagnostic (OBD) >> Motronic system, On Board Diagnostic (OBD) >> Output Diagnostic Test Mode (DTM) >> Test requirements >> Actuating camshaft adjustment valves -N205-, -N208-

Actuating camshaft adjustment valves -N205-, -N208-

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Actuating Camshaft Adjustment Valves
G03611133Courtesy of AUDI OF AMERICA, INC.

Camshaft adjustment valves 1 and 2 (-N205- and -N208-) will continue to be activated (or will click) for about 1 minute.

If camshaft adjustment valve 1 or 2 is not activated:

See ENGINE -- CYLINDER HEAD, VALVETRAIN