Basic setting: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2005 Audi allroad, 2004 Audi allroad, 2004 Audi A6, 2003 Audi allroad, and 2003 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
With the ignition on and the engine not running, the following operation can be performed in the "Basic setting" mode (function 04):
- Adaptation of throttle valve control module to ECM. See THROTTLE VALVE CONTROL MODULE -J338 -, ADAPTATION .
- Vehicles with automatic transmission: Adaptation of kick down function of accelerator pedal position sensor to ECM. See Display group 63 (in KICK-DOWN FUNCTION, ADAPTATION ).
With the engine running, the following operations can be performed in the basic setting mode "Function 04":
- Learning process (adaptation) for oxygen sensor control. See every Display group.
- Troubleshooting by targeted activation and deactivation of oxygen sensor control. See Display group 99 (Observe note in OXYGEN SENSOR AND OXYGEN SENSOR CONTROL BEFORE THREE WAY CATALYTIC CONVERTER (TWC), CHECKING ).