LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> A8 Quattro >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Coil Spring >> Removal

Coil Spring: Removal

  1. Raise and support vehicle. Remove wheel. Remove splash shield bolts and shield.
  2. Install Spring Tensioner (1752/1) with mounting tool (1752/3). See Fig 1 . Compress and remove coil spring.
    Fig 1: Compressing Coil Spring
    G00074949Courtesy of AUDI OF AMERICA, INC.
scientia non olet · About LEMON Manuals