LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Servicing - A/T (01V, Fwd)) >> Inspection >> Ignition Key Lock

Ignition Key Lock

WARNING: This page is about a different variant/trim than selected.
  1. With ignition set to "ON" position. Selector lever should be able to be moved out of "P" position with maximum force of 5.6 lbs (25 N) on selector lever handle button, without sticking. Ignition key can only be removed with selector lever is in "P" position.
  2. With selector lever in "P" position, ignition lock can be moved into removal position without sticking.
  3. With ignition lock in removal position, selector lever cannot be moved out of "P" position with selector leer handle button pushed in.
scientia non olet · About LEMON Manuals