LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Servicing - A/T (01V, Fwd)) >> Adjustments >> Selector Lever Cable >> Adjusting

Selector Lever Cable: Adjusting

WARNING: This page is about a different variant/trim than selected.
  1. Move selector lever to "P" position. Move selector lever on transmission to "P" position (rear most position). Parking lock must engage. Slightly loosen bracket-to-transmission mounting bolts (C). See Figure .
  2. Ensure selector lever cable is free of tension. Relieve tension if necessary. Tighten mounting bolts (C) of bracket. Tighten bolt to 17 ft. lbs. (23 N.m). Check shift control. See SHIFT MECHANISM  .
scientia non olet · About LEMON Manuals