Remote mirror control switch, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the upper and lower handle shell of the door trim.
- Lift the trim cover for the window lifter/remote mirror switch with a plastic wedge.
- Disconnect all harness connectors to the switch
- Push both locks -1- to the right and at the same time remove the switch -2- in direction of arrow -A- from the trim.