Rear lid contact switch, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove rear lid lock.
- Disconnect harness connector.
- From the removed lid lock -1- use a small standard screwdriver and unlock the plastic loop -3- and both spread rivets -4-. See Fig 1.
- Push lever -2- in direction of arrow and flip plastic piece -3- to the rear.
- Remove the contact switch -3- carefully from the rear lid lock -1-.