Memory switches for the driver seat, removing and installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Using a Phillips-head screwdriver and remove the screw from the driver door storage. Lift out the complete switch assembly.
- Unplug the plug connection at the switch.
- Unlock both locks -1- and push the switch -2- in the direction of the arrow from the housing.