Adaptation of fuel gauge

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (1 Of 12)

G02729236

Courtesy of AUDI OF AMERICA, INC.

Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (2 Of 12)

G02729237

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (3 Of 12)

G02729238

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -3-.
Press -Q- button to confirm input.

NOTE:

Adaptation only for vehicles with on board computer.
Value entered must be between 85% and 115%.
Value must be entered in steps of 5%.
If the value "100" was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.

Indicated on display:

Fig 4: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (4 Of 12)

G02729239

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

NOTE: Correction of fuel gauge is only possible via direct input.

Indicated on display:

Fig 5: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (5 Of 12)

G02729240

Courtesy of AUDI OF AMERICA, INC.

Input desired correction value via scan tool keypad, fill initial positions with "0."

Example:

Desired input value: 90%

Keypad input: 00090

Indicated on display (example only):

Fig 6: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (6 Of 12)

G02729241

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 7: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (7 Of 12)

G02729242

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (8 Of 12)

G02729243

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (9 Of 12)

G02729244

Courtesy of AUDI OF AMERICA, INC.

Conclude adaptation of the fuel gauge by pressing the --> button.

Indicated on display

Fig 10: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (10 Of 12)

G02729245

Courtesy of AUDI OF AMERICA, INC.

Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display

Fig 11: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (11 Of 12)

G02729246

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

NOTE: For incorrect input, tester switches to function mode.

Indicated on display:

Fig 12: V.A.G 1551 Scan Tool Display - Adaptation Of Fuel Gauge (12 Of 12)

G02729247

Courtesy of AUDI OF AMERICA, INC.

Press --> button.
Select "Adaptation" function 10 again and select adaptation channel 03.
Perform adaptation of fuel gauge again.