Test requirements
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Check fuse for function according to wiring diagram.
- Connect VAS 5051 tester or VAG 1551 scan tool. See VAS 5051 TESTER OR VAG 1551 SCAN TOOL, CONNECTING AND SELECTING FUNCTIONS .
NOTE:
- If nothing is indicated on display, check voltage supply for VAG 1551 scan tool according to wiring diagram.
- Additional instructions can be called up via the HELP button on the scan tool.
- The --> button is used for advancing through the program sequence.
- An incorrect entry can be canceled using the -C- button.
- Function 00 "Automatic test sequence" can be performed in operating mode 1 "Rapid data transfer." This automatically checks all control modules installed in the vehicle.
- Switch on ignition.
- Switch printer on via the PRINT button (indicator lamp in button lights up).
- Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display
Address word for Acoustic Parking System: 76
- Press buttons -7- and -6-.
Indicated on display:
- Press -Q- button to confirm input.
Indicated on display (example only): after approx. 5 seconds:
- 4D0919283: Part number of control module for parking aid (see also parts catalog)
- D03: Software version of control module for parking aid
- Coding 1108: Coding of control module for parking aid
- WSC 06812: dealership number
- Press --> button.
If one of these messages is displayed, perform trouble shooting according to troubleshooting diagnostic.
Indicated on display
- Pressing the HELP button will print out an overview of all of the possible functions.
- Press the --> button to continue program sequence.