Evaporative Emissions (EVAP) control system, servicing: Notes
NOTE:
- The EVAP canister is located in the left-rear wheelhousing behind the wheelhousing liner.
- When working on the EVAP canister the wheelhousing liner should be removed.
NOTE:
The following list refers to items in Fig 1
.
- From expansion tank
- 6 mm diameter
- To engine
- 8 mm diameter
- Vent line
- Line ends at vehicle floor
- Evaporative Emissions (EVAP) canister
- EVAP canister purge regulator valve
- Checking operation:
See EVAPORATIVE EMISSIONS (EVAP) CANISTER PURGE REGULATOR VALVE, ELECTRICAL TESTING .
- Checking operation:
- To connection between intake manifold and throttle body