Function Mode 10: Adaptation: Notes
NOTE:
After changing an adaptation value or completing adaptation in an adaptation channel, adaptation mode must be entered again in order to select another adaptation channel.
Press 10, then press "Q" key to confirm input. Select desired channel. See ADAPTATION CHANNEL table. After desired channel has been selected, go to appropriate channel procedure.
ADAPTATION CHANNEL
| Channel | Function |
|---|---|
| 01 | Fuel Gauge |
| 05 | SRI-Oil Change Interval |
| 06 | SRI-Service Interval 1 (Miles) |
| 07 | SRI-Service Interval 1 (Days) |
| 08 | SRI-Service Interval 2 (Days) |
| 09 | Odometer Reading |