LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1998 >> A4 Avant >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Component Testing >> Vehicle Speed Sensor (VSS)

Vehicle Speed Sensor (VSS)

  1. Turn ignition off. Disconnect vehicle speed sensor harness connector, located on left side of transmission next to drive flange. Inspect connector terminals for damage and repair as necessary.
  2. Connect Test Harness (VW 1501) to VSS. Place transmission in Neutral. Measure continuity between test harness terminals No. 2 and 3. Roll vehicle back and forth. If reading does not change from continuity to no continuity, replace VSS.
scientia non olet · About LEMON Manuals