LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1997 >> Cabriolet >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (On Board Diagnostic (OBD) - 4.2L V8 5V - BCY) >> On Board Diagnostic (OBD) >> Readiness code, reading >> Readiness code, generating >> Step 2: Erasing fault memory >> Condition

Step 2: Erasing fault memory: Condition

WARNING: This page is about a different car, the 2003 Audi RS 6. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on VAS 5051:

Fig 1: Function Display VAS 5051 - Generating Readiness Code, Erasing Fault Memory (1 Of 2)
G03613355Courtesy of AUDI OF AMERICA, INC.
NOTE: On erasing the fault memory, the readiness code is reset and therefore must be regenerated.

Indicated on VAS 5051:

Fig 2: Function Display VAS 5051 - Generating Readiness Code, Erasing Fault Memory (2 Of 2)
G03613356Courtesy of AUDI OF AMERICA, INC.
    • No display (prior to erasing)

      or

    • Fault memory erased
  2. Is function to be implemented? Note: Data will be erased
scientia non olet · About LEMON Manuals