Rear lid contact switch, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Insert the contact switch carefully in to the seat of the hatch lock.
Flip the plastic piece -2- forward again and lock in with the contact switch.

Fig 1: Flipping Plastic Piece Forward To Lock In With The Contact Switch

Courtesy of AUDI OF AMERICA, INC.

Reconnect harness connector
Reinstall rear lid lock.
See REAR LID LOCK CYLINDER, REMOVING AND INSTALLING .