Horn, removing and installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Remove bumper.
See FRONT BUMPER, REMOVING AND INSTALLING .
Remove nut (arrow) and the signal horn -1- from the bracket.

Fig 1: Removing Nut & Signal Horn From Bracket

Courtesy of AUDI OF AMERICA, INC.

Unplug electrical harness connector.

NOTE: Illustration depicts left signal horn. Perform the same operation in mirror image for the right side signal horn.