LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1997 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Lights, Switches-Exterior) >> Lock cylinder and ignition/starter switch, servicing >> Ignition/starter switch, removing and installing >> Installing

Ignition/starter switch, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Ignition/starter switch and lock cylinder must both be in the "ignition on" position when installing.
  • Tighten both retaining screws on the steering lock housing and seal with paint.
  • Install in reverse order of removal.
scientia non olet · About LEMON Manuals