LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1997 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Instruments) >> Instrument cluster >> Terminal assignments at instrument cluster >> 32-pin connector for additional functions, green

32-pin connector for additional functions, green

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The following list refers to Fig 1 .
  1. Transponder 1
  2. K-wire
  3. Vacant
  4. Vacant
  5. Outside air temperature sensor
  6. Ignition key terminal 86s
  7. Remote access for auxiliary heater
  8. Consumption signal
  9. E-Gas
  10. Reserve access
  11. Oil level
  12. Multi-function switch Output B
  13. Multi-function switch Output A
  14. Multi-function switch, enter button
  15. On board computer, left
  16. On board computer, right
  17. Transponder 2
  18. CAN-Bus LOW engine harness
  19. CAN-Bus shielding engine harness
  20. CAN-Bus HIGH engine harness
  21. CAN-Bus LOW Navigation
  22. CAN-Bus HIGH Navigation
  23. CAN-Bus HIGH Comfort
  24. CAN-Bus LOW Comfort
  25. Immobilizer input from immobilizer
  26. Engine electronics (CARB, OBDII)
  27. On-board computer, reset
  28. Multi-function switch, menu button
  29. Outside chime
  30. Outside gong
  31. Parking light, right
  32. Parking light, left
  33. Fig 1: Identifying 32-Pin Connector For Additional Functions, Green
    G02729626Courtesy of AUDI OF AMERICA, INC.