LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1997 >> A8 Quattro >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Fuel Supply - 3.7L & 4.2L V8 4V (AEW, ABZ) >> Fuel pump with integrated reservoir, removing and installing >> Installing

Fuel pump with integrated reservoir, removing and installing: Installing

Installation is the reverse of removal.

Tank retaining strap tightening torque: 20 Nm (15 ft lb)

NOTE: Notes on installation:
  • When installing the fuel tank, make sure that the wires for the ABS wheel speed sensors are correctly routed.
  • First slide the ventilation lines through the opening on the side chassis member and then guide in the fuel tank.
scientia non olet · About LEMON Manuals